Full ETTL II /iTTL Autoflash and Ratio flash and exposure tracking
FP/High speed flash synch up to 1/800th sec.
Autoflash sequences up to 8 frames per second
Triggers flash or cameras
Works with all Pocket Wizard 32 channels and zones
Product Details
Product Dimensions:
1.4 x 3.6 x 2.8 inches ; 5.4 ounces
Shipping Weight: 7 pounds (View shipping rates and policies)
Shipping: Currently, item can be shipped only within the U.S.
ASIN: B001T9NXA0
Item model number: FlexTT5 For Nikon
Average Customer Review:
This review is from: Pocket Wizard FlexTT5 Transceiver For Nikon TTL Flashes and Digital SLR CamerasBottom line - Cream of the CropI've been using this miniTT1 and FlexTT5s with my D90 and D200 for several months now. To say that they are perfect would be an overstatement. To say they work every bit as well as if they were hard-cabled is pretty much dead on. And with these things you don't have the challenges of tripping over or getting twisted in long wire runs. As a simple example, I can set my flash (Nikon SB-800 AF Speedlight for Nikon Digital SLR Cameras - Old Version) with a Gary Fong Lightsphere Universal System Cloud attached on a stand in the middle of a large room. I have my camera (Nikon D200 10.2MP Digital SLR Camera (Body Only)) set to manual exposure, 1/30 @ f5.6. Pictures I take anywhere in the room are perfectly exposed. They also work perfectly, albeit without the TTL functions, with the original PocketWizard Plus II Transceiver 801-125 Relay Radio Slave Transmitter Receiver 2-piece w/ PockeWizard Case for 2 in the mix.There were some issues with the Canon version of these controllers and that was attributed to both the Mini/Flex and Canon "natively" using radio signals to control things. Nikon took a different approach, using light instead of RF signals for their Creative Lighting System (CLS) commands As a result there is no interference with the latest equipment from PocketWizard.There are a flood of flash controllers available these days. Some cost a fraction of what these do and if you are only needing them to go short distances and can tolerate the occasional failure they're OK. PocketWizard, with the miniTT1 and FlexTT5, along with their continued support for the other equipment in their product line, caters to a more demanding user with far greater performance and reliability requirements. For me, anyway, it didn't make sense to take a chance on reliability or performance, or give up the capabilities provided here, just to save some on a one-time expense.BTW, I feel that honest, effective reviews can take the place of first-hand experiences that are lacking in online shopping. I've always appreciated the help I've received from other reviewers and work hard to return the favor as best as I can. I hope you found this review helpful and if there was anything you thought was lacking or unclear leave a comment and I'll do what I can to fix it....
This review is from: Pocket Wizard FlexTT5 Transceiver For Nikon TTL Flashes and Digital SLR CamerasCustomer review from the Amazon Vine™ Program (What's this?)
I'll start the review by noting that this is for the bundle of a Mini (for your camera) and two flexes (for external flashes). I would recommend checking the individual prices of these products first since the bundle seems to be at about the same price if the pieces were bought individually. Since the Mini is ONLY a transmitter (the Flex is a transceiver: it transmits and receives), and because it uses coin batteries and not AAs like the Flex, quit a few people prefer to have all Flexes and not buy the Mini at all. As such, you may want to buy a set of Flexes instead. My personal opinion is that I love the low profile and low weight of the Mini on my camera (though I keep leaving the thing on and draining the coin batteries, which can be annoying to replace).Also, note that these are (as described in the title and description) for NIKON equipment only. To make the most use of them, you will need a Nikon camera body and a set of Nikon flashes.------OverviewRight off the bat, I LOVE the design improvements over their predecessors, the PW Plus IIs. And these do appear to be much more reliable than their Canon Flex/Mini counterparts. The extra time that Pocket Wizard put into developing the Nikon version appears to have paid off. However, several beta testers I know and quite a few users have noted some limitations in these first versions. But each software upgrade (that you can download from the Pocket Wizard website) greatly fixes and enhances the units. As with the Canon versions, I expect them to get better and better over time with each upgrade. Both the Mini (a receiver that is tiny and fits on your camera's hot shoe) and the Flex (can be both a receiver or transceiver) are flat and sleek - they do not stand up or poke out annoyingly like the Plus IIs did. Even better, by incorporating hot shoes and shoe feet directly onto the units, you no longer have to worry about cords or velcro. This is wonderful - no more cords falling out or units falling off the flash. I don't have to listen to the pocket wizard dangling off a light stand as I move it around. The flash sits directly on the Flex:If you want to see a video of the new units and how small and easy they are, the PW people have a video on their site - check it out if you want to see these in use.By having both a shoe and foot on each Flex or Mini, you have the option of using them with other items that also require a hot shoe - such as a Commander unit, AC3, or another flash. By using it with a Nikon Commander, AC3, or another flash, you are given the further option of being able to adjust your Flash Exposure Compensation (FEC) at the camera rather than having to walk to a flash. If I were to give my one complaint about the new PWs, it's that they don't have that ability built right in to the Flex or Mini units (w...
Detail Products
Detail Reviews
Click here for more information
»»»Visit Store NOW...
Best price click here
